Manual rotuladora trine

Disponível somente no TrabalhosFeitos
  • Páginas : 102 (25491 palavras )
  • Download(s) : 0
  • Publicado : 15 de fevereiro de 2013
Ler documento completo
Amostra do texto
Operation and Service Manual

Accraply / Trine Labeling Systems
Trine Model 4450 Quick Change™ Roll-Fed Labeler

3580 Holly Lane North Plymouth, MN 55447 USA Phone: (763) 557-1313 Fax: (763) 519-9656 E-mail:

935 S Milliken Ave., Suite B Ontario, CA 91761 Phone: (909) 605-8200 Fax: (909) 937-6896

3070 Mainway Unit 19 Burlington, Ontario CanadaL7M 3X1 Phone: (905) 336-8880 Fax: (905) 335-5988 Web Site:

Section 3
Shipment & Placement

DISCLAIMER The terms and conditions governing the use of Accraply/ Trine Labeling Systems products is set forth solely in the written contracts between Accraply/Trine Labeling Systems and its customers. No statement contained in this manual, including statements regardingcapacity, suitability for use, or performance of products, shall be considered a warranty by Accraply/Trine Labeling Systems for any purpose or give rise to any liability of Accraply/Trine Labeling Systems. In no event will Accraply/Trine Labeling Systems be liable for any incidental, indirect, special, or consequential damages, (including lost profits) arising out of or relating to this publication orthe information contained in it, even if Accraply/Trine Labeling Systems has been advised, knew, or should have known of the possibility of such damages. The information described in this manual is copyrighted and is confidential information and is the property of Accraply/Trine Labeling Systems. Under the copyright laws, no part of this manual may be copied, photocopied, reproduced, translated,or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of Trine Labeling Systems.

Revision History: Revision No. Issued Issued Issued Issued Issued Issued Issued Sections(s) All Sections All Sections All Sections All Sections All Sections All Sections All Sections Description First Edition Second Edition Third Edition Forth EditionFifth Edition Sixth Edition Seventh Edition Date of Revision 09-01-2010

Stabilizer Belt Option Appendices Label Overlap & Hand Splicing Shim Chart

Section 24 Section 25 Appendix A Appendix B

Glossary of Terms Appendix C Changes Parts Vacuum Drum (VD) Cutter Spacer Label Feed Roller Infeed Guides complete with Spacers and Brackets Starwheel complete with Spacer and Top Hub Roll on PadWatlow Controller Settings Operator Interface Terminal Screens (OIT) Spare Parts Information Technical Data Sheet – Hot Melt Adhesive Appendix D Appendix E Appendix F Appendix G

The bills of material and the sub assembly drawings for the basic 4450 quick change labeler are provide separately, they are not included in this document.

Section 1
General Information

Trine Model 4500 QUICKCHANGE Labeler Specifications


The Trine Model 4450 Quick Change Labeler is a continuous motion, roll-fed labeling machine capable of applying square-cut spot patch or full-wrap labels to cylindrical containers using hot-melt adhesive.

General Machine Layout – Front ElevationView

Section 1 – Page 1

General Machine Layout – Top View

Principles of Operation LABEL HANDLINGAND REGISTRATION A continuous roll or web of labels is drawn toward the cutter assembly by the pressure roller assembly, consisting of a driven aluminum feed roller and a free wheeling pinch roller. The pinch roller can swing into or away from the feed roller.

Between the label roller and pinch roller assemblies are the guide rollers and the registration photo eye. This entire section helpsguide the web from the label roller past the registration photo eye and on to the pinch roller assembly.

Section 1 – Page 2

Label Handling & Registration

Registration is actually accomplished by combining the registration photo eye, the drive feed roller and the firmware located in the control cabinet. These elements together make up the registration system that is called ERS (Electronic...