Impressora

Disponível somente no TrabalhosFeitos
  • Páginas : 8 (1821 palavras )
  • Download(s) : 0
  • Publicado : 12 de abril de 2013
Ler documento completo
Amostra do texto
DELL1100TECH

Technical Instructions
CORPORATE LOS ANGELES, USA
US 1 800 394.9900 Int’l +1 818 837.8100 FAX 1 800 394.9910 Int’l +1 818 838.7047

Cartridge Information See Last Page.

Tools & Supplies See Last Page.

1

Photo 1

Step 1
Having the handle of the cartridge facing you remove two Philips screws one from each side on the top of the cartridge. (Photo 1)

ATLANTA, USAUS 1 877 676.4223 Int’l +1 678 919.1189 FAX 1 877 337.7976 Int’l +1 770 516.7794

KANSAS CITY, USA
US 1 913 871.1700 FAX 1 913 888.0626

MIAMI, USA
US 1 800 595.4297 Int’l +1 305 594.3396 FAX 1 800 522.8640 Int’l +1 305 594.3309

Step 2
Grab the top of the cartridge that has the instruction label on it with both hands. Pull the cartridge top up and back towards yourself to remove. This isthe waste hopper section of the cartridge and as it is removed may leak some toner. Turn the waste hopper over and place on the table with label facing down. (Photo 2)

Photo 2

NEW YORK, USA
US 1 800 431.7884 Int’l +1 631 588.7300 FAX 1 800 431.8812 Int’l +1 631 588.7333

TORONTO, CAN
CAN 1 877 848.0818 Int’l +1 905 712.9501 FAX 1 877 772.6773 Int’l +1 905 712.9502

Step 3
Place thetoner hopper aside and protect from light. (Photo 3)

BUENOS AIRES, ARG
ARG 0810 444.2656 Int’l +011 4583.5900 FAX +011 4584.3100

Photo 3

MELBOURNE, AUS
AUS 1 800 003. 100 Int’l +62 03 9561.8102 FAX 1 800 004.302 Int’l +62 03 9561-7751

SYDNEY, AUS
AUS 1 800 003.100 Int’l +62 02 9648.2630 FAX 1800 004.302 Int’l +62 02 9548.2635

Step 4
Take the waste hopper with the wiper bladefacing you remove two Philips screws one from each side of the wiper blade. Lift the blade straight up from the waste hopper and visually inspect for damage. Clean the blade with compressed air and clean lint free cloth. Set blade aside. (Photo 4)

MONTEVIDEO, URY
URY 02 902.2001 Int’l +5982 902.2001 FAX +5982 900.0858

Photo 4

JOHANNESBURG, S.A.
S.A. +27 11 974.6155 FAX +27 11 974.3593

SÃOPAULO, BRAZIL
Int’l +55 11 5524.8000

RAANANA, ISRAEL
ISR 09 760.12.39 Int’l +972 9760.12.39 ISR 052.38.555.82 Int’l +972 5238.555.82

E-mail: info@futuregraphicsllc.com
REV. 10/10/05

Website:

www.futuregraphicsllc.com

2
Photo 7

Dell 1100 Technical Instructions
Step 7
Using a small flat blade screwdriver pry the end cap off carefully. The end caps contain the drum axles.(Photo 7)

Step 5
Clean the remaining waste toner from the waste hopper using a vacuum or compressed air. Careful not to damage the retaining blade in the waste hopper, opposite the wiper blade that was removed. Inspect the retaining blade after cleaning to insure that it is straight and not damaged. (Photo 5)

Photo 8

Step 8
Rotate the cartridge so that the opposite end is facing you withthe handle of the cartridge to the left. Remove two Philips screws that are holding the end cap in place. Using a small flat blade screwdriver pry the end cap off carefully. (Photo 8)

Photo 5

Photo 9

Step 9
Rotate the cartridge so that the handle of the cartridge is facing you. Grasp the PCR shaft and slide it towards your left to remove it from the right PCR saddle. To remove the PCRfrom the left PCR saddle, lift the PCR up on the right side to clear movement and move towards the right to remove the PCR. (Photo 9)

Step 6
Taking the wiper blade that is to be installed pad the blade with padding powder. Reinstall the blade using two Philips screws one on each side of the blade. Place completed waste hopper aside. Set the toner hopper with the long handle towards your rightand remove two Philips screws that are holding the end cap in place. (Photo 6)

Photo 10

Step 10
Remove the drum by pushing up on the helical gear with your finger enough to grab the entire gear. Pull the drum away slightly from the opposite side and lift completely out. Set the drum aside in a protective area. (Photo 10)

Photo 6

Photo 11

Step 11
Rotate the cartridge so that the...
tracking img