4025 10

10128 palavras 41 páginas
213

PUC-Rio - Certificação Digital Nº 0115617/CA

9
Referências bibliográficas
1

PORTAL GÁS E ENERGIA: gás natural.
Disponível em: http://www.gasenergia.com.br/portal/port/noticias/artigos/expectativa. jsp. acesso em: 17 maio 2003

2

PORTAL GÁS E ENERGIA: artigo técnico por Flavio Santos Tojal.
Disponível em: http://www.gasenergia.com.br/portal/port/noticias/artigos/expectativa. jsp. acesso em: 17 maio 2003

3

TAREK AHMED, Reservoir Engineering Handbook, 2000

4

H. DALE BEGGS,
Analysis,1991

5

AL-HUSSAINY, R., RAMEY, H.J. Jr. and CRAWFORD, P.b., 1966.
The Flow of Real Gases Through Porous Media. J. Pet. Tech., May:
624-636. Trans. AIME.

6

CHARLES R. SMITH, G. M. TRACY, R. LANCE FARRAR, Applied
Reservoir Engineering, Volume1, 1992.

7

CULLENDER, M. H.
The Isochronal Performance Method of
Determining the Flow Characteristics of Gas Wells. Trans. AIME,
1995.

8

JONES L. G., BLOUNT E. M. and GLAZE O. H. Use of Short Term
Multiple Rate Flow Tests to Predict Performance of Wells Having
Turbulence. Paper SPE 6133, 1976.

9

H. DALE BEGGS, Gas Production Operations, 1984

10

CHI U. IKOKU, Natural Gas Production Engineering, 1984

11

MICHAEL J. ECONOMIDES, A. DANIEL HILL, CHRISTINE EHLIGECONOMIDES, Petroleum Production System, 1994.

12

SUNJAY KUMAR, Gas Production Engineering , 1987

13

JOE MACH, EDUARDO PROAÑO, KERMIT E. BROWN, A Nodal
Approach for Applying Systems Analysis to the Flowing and Artificial
Lift Oil or Gas Well, , SPE 8025, 1979

14

KERMIT E. BROWN, Nodal AND JAMES F. LEA, System Analysis of Oil and Gas Wells, SPE 14014, 1985

Production

Optimization,

Using

Nodal

PUC-Rio - Certificação Digital Nº 0115617/CA

214

15

R.M FREAR JR., STONEWALL GAS CO., AND J.P. YU AND J.R.
BLAIR, Application of Nodal Analysis in Appalachian Gas Wells, ,
West Virginia U., SPE 17061, 1987

16

GILBERT W. E. , Flowing and Gas Lift Well Performance, API Drill.
Prod. Practice, 1954

17

Nind. T. E. W. , Principles of Oil Well Production, 1964

18

KERMIT E.

Relacionados

  • Usinagem de eixo
    767 palavras | 4 páginas
  • Roteiro de fabriacação
    716 palavras | 3 páginas
  • Usinagem passo a passo
    767 palavras | 4 páginas
  • Atys
    6696 palavras | 27 páginas
  • Tcc m76
    3994 palavras | 16 páginas
  • Engenharia de Produção
    2124 palavras | 9 páginas
  • Bairro Kiefhoek
    921 palavras | 4 páginas
  • Potência do torno
    1524 palavras | 7 páginas
  • Usinagem
    15831 palavras | 64 páginas
  • calculo
    304 palavras | 2 páginas