Yes sir

Disponível somente no TrabalhosFeitos
  • Páginas : 7 (1714 palavras )
  • Download(s) : 0
  • Publicado : 30 de março de 2013
Ler documento completo
Amostra do texto
Magic Lantern v2.3
for Canon 5D Mark II, 550D, 60D, 600D, 50D and 500D

Install guide
www.magiclantern.fm
July 23, 2012
Magic Lantern is an open (GPL) framework for developing enhancements to the amazing
Canon 5D Mark II and 550D/T2i digital SLRs. Magic Lantern is being developed by a small
team, helped by a very enthusiastic and respectful user community.
Active developers:
Alex – maindeveloper
Arm.Indy – author of crypto tools and most new ports
G3gg0 – reverse engineering guru
Coutts – porting ML to 5D classic
Nanomad – porting ML to 1100D/T3
SztupY – author of ML USB controller and others
Past developers (come back guys!):
Trammell Hudson – original author and former leader of Magic Lantern project
AJ – developed the AJ version of Magic Lantern for 5D Mark II
Codecontributions piersg, nandoide, stefano, trho, deti, tapani, phil, RoaldFre, Colin Peart,
cpc, msi, robotsound, maclema, adijiwa, kyselejsyrecek, mk11174, Scrax, OnePercent,
Raymond Lo, Rob Kramer, Takashi Miyake, Tobias Doerffel, Paul Nolan, Martin M, and
the list is growing :)
Card tools by Pel, Zeno, lichtjaar
Website Team Redkite Bart, Nanomad, Michael Zöller, Malcolm Debono, CameraRick,Francis Danforth, Scrax, 1%
Magic Lantern logo by elJoseph
Thanks to all the users who provided feedback, reported bugs, and supported the Magic
Lantern project by donations!
Also, thanks to CHDK team and all the supporters of the old 5D2 Magic Lantern!

Magic Lantern is being developed by independent film makers in our spare time
and at risk to our beloved cameras. We hope that it saves youtime and aggravation
on set, and we’d appreciate your support. You can help by donating via PayPal, or
through equipment donations. You can also contact me (Alex) via email. Thanks!

1

.***************************************************
* THIS IS DANGEROUS AND MIGHT DAMAGE YOUR CAMERA. *
*
NO WARRANTIES. NO GUARANTEES.
*
*
*
*
IF IT BREAKS YOU GET TO KEEP BOTH PIECES
****************************************************
If you are not comfortable with this, stop reading and delete the software before you are
tempted to try running it on your camera.
Important notes

2

Introduction

2

With great power comes great responsibility!

3

Get the right camera firmware version

3

First-time installation

4

Installing Magic Lantern on other cards

5Updating Magic Lantern

5

Uninstalling Magic Lantern

5

Troubleshooting

6

Important notes
∙ After opening the card door, always wait for LED confirmation (or for 5 seconds) before removing the card!!! (no such problem on 550D).
∙ EyeFi cards will not work; you will have to use SD / SDHC / SDXC / CF cards.
∙ If you have a bootable card and have the BOOTDISK flag set in the camera(which the
installer does), and you do not have an AUTOEXEC.BIN file on the card the camera WILL
NOT BOOT! It will hang and not wake up until the battery is removed.
∙ If you encounter a “locked up” camera, quickly remove the battery.
∙ When in doubt, remove the battery and reboot.
∙ And, remember that this software can damage or destroy your camera.

Introduction
There are two ways ofrunning user code on Canon DSLR cameras:
1. Using the update process with a .fir file, which must be digitally signed.

2

2. Using the bootdisk process: the autoexec.bin file is loaded and executed. This file
does not have to be signed, but the bootdisk flag must be enabled in the camera.

With great power comes great responsibility!
Before installing Magic Lantern, you need to:
∙ Know how touse a computer (how to download a file, how to unzip an archive, how to
open a PDF document...)
∙ We recommend you to use your camera for a few months. Then you know how to operate it properly and know your way around the different functions. Then take the next
step and consider installing Magic Lantern.
∙ Do your research. There is a lot of information available on Magic Lantern web site....
tracking img