Manual No.: 12.001
Important Safety Instructions
Please read this safety information carefully and keep these instructions and
heed all warnings. Always follow these instructions to avoid the risk of injury to
yourself or damage to your equipment.
•Placement: Do not place the receiver on an unstable cart, stand, tripod, bracket or
table. The receiver may fall to causethe serious personal injury and damage to the
receiver. When a cart is used, use caution when moving the cart/Receiver
combination to avoide injury from tip-over. Do not use or store the receiver where it is
exposed to direct sunlight, or near any heat sources such as rodiators, heat registers,
stoves or other apparatus(Including amplifiers) that produce heat. Never stack other
electronicequipment on top of the receiver. Place the receiver at least 30mm from
the wall. Do not use this apparatus near water.
• Operating Power : Operate the receiver using only the type of power source
indicated on the marking label. Protect the power cord from being walked on or
pinched. Particularly at plugs, convenience receptacles, and the point where they exit
from the receiver.
Unplug thereceiver during lighting storms or when unused for long periods of time.
•Ventilation: Do not block the receiver ventilation holes.
Ensure that free airflow is maintained around the receiver.
•Cleaning: Unplug the receiver from the AC power outlet before cleaning. Use only a
dry cloth for cleaning the exterior of the receiver.
•Attachment: Do not use accessories or attachments not recommended bythe
receiver manufacturer as they may cause problems to the equipment and will void
•Water Proof: Do not expose the receiver to the water or any liquids.
•Grounding: The ground of the LNB cable must be directly connected to the system
ground for the satellite dish. The grounding system must comply with local
regulations. Do not defeat the safety purpose of the polarizedor grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Chapter 1. Basic Information
Chapter 5. Ver. INFOFeatures
Chapter 6. Other Useful Functions 20
Chapter 2. Installation
Do not attempt to service the receiver by yourself as opening or removing cover may
expose you to the dangerous voltage and will void warranty.
Refer all servicing to qualified service personnel. Servicing isrequired when the
receiver has been damaged in any way, such an power-supply cord or plug is
damaged, liquid has been spilled or objects has follen into the receiver, the receiver
has been exposed to rain or moisture, does not operate normally, or has been dropped.
To reduce the risk of electric shock do not perform any servicing other than that
ccontained in the operating instractionsunless you are qualified to do so.
Please contact the authorized service center and personnel.
Chapter 3. System Setting
Chapter 4. HDD
Event TimersRemind Timers
Recording / REW & FF / Playback
Chapter 7. Technical Specification 24
Chapter 1. Basic Information
1.2 Package Contents
Please check to make sure the following...
Ler documento completo
Por favor, assinar para o acesso.