Mecanico

947 palavras 4 páginas
RSM/RCS-Series, Low Height Cylinders
Shown from left to right: RSM-1000, RSM-300, RSM-50, RCS-1002, RCS-302

Maximum Power to Height Ratio
Saddles All RCS-Series cylinders have plunger mounting holes for installation of tilt saddles. See table for selection and dimensional information.
Page:

23

Low Clearance Lifting The LW-16 Lifting Wedge and SOH-Series Machine Lifts are the perfect choices for lifting loads that have low clearance.
Page:

165

RSM-Series, Flat-Jac® Cylinders • Compact, flat design for use where other cylinders will not fit • RSM-750, 1000 and 1500 have handles for easy carrying • Mounting holes permit easy fixturing • Baked enamel finish for increased corrosion resistance • CR-400 coupler and dust cap included on all models* • Hard chrome plated high-quality steel plungers • Grooved plunger ends require no saddle • Single-acting spring return RCS-Series, Low Height Cylinders • Lightweight, low profile design for use in confined spaces • Baked enamel finish for increased corrosion resistance • Plunger wiper reduces contamination, extending cylinder life • CR-400 coupler and dust cap included on all models • Grooved plunger end with threaded holes for mounting tilt saddles • Integral handle on RCS-1002 for easy carrying • Plated steel plungers • Single-acting spring return

Only a couple of inches are needed for an RSM-cylinder to lift this large steel construction.

Cylinder Stroke Model Number Capacity (tons) [max.]

Cyl. Effect. Area (in2)

Oil Cap.

(in)

(in3)

5 [4.9] 10 [11.2] 20 [22.1] 30 [32.4] 50 [48.1]
75 [79.5] 100[98.1] 150 [153.4]

10 [11.2] 20 [22.1] 30 [32.4] 50 [48.1]
100 [98.1]

.25 .44 .44 .50 .63 .63 .63 .63 1.50 1.75 2.44 2.38 2.25

RSM-50* RSM-100 RSM-200 RSM-300 RSM-500 RSM-750 RSM-1000 RSM-1500 RCS-101** RCS-201** RCS-302** RCS-502** RCS-1002**

.99 2.24 4.43 6.49 9.62 15.90 19.63 30.68 2.24 4.43 6.49 9.62 19.63

.25 .98 1.94 3.25 6.01 9.94 12.27 19.17 3.35 7.75 15.82 22.85 44.18

Relacionados

  • mecanico
    4068 palavras | 17 páginas
  • mecanico
    1009 palavras | 5 páginas
  • Mecanico
    1227 palavras | 5 páginas
  • mecanico
    1654 palavras | 7 páginas
  • mecanicos
    394 palavras | 2 páginas
  • mecanico
    10629 palavras | 43 páginas
  • Mecânico
    4481 palavras | 18 páginas
  • Mecanico
    4018 palavras | 17 páginas
  • Mecânico
    4888 palavras | 20 páginas
  • Mecanico
    2513 palavras | 11 páginas