Matlab

Disponível somente no TrabalhosFeitos
  • Páginas : 8 (1773 palavras )
  • Download(s) : 0
  • Publicado : 24 de novembro de 2012
Ler documento completo
Amostra do texto
MPRealICE.dll v6.0.8.9
RealICECMD.exe v1.00.14
MPLAB REAL ICE Suite (OS/FW) v1.27.04 (RIFW_012704.jam)
ICD 3 Software and Firmware versions:
MPICD3.dll v1.0.3.75
ICD3CMD.exe v1.00.14
MPLAB ICD 3 Suite (OS/FW) v1.27.04 (ICD3FW_012704.jam)


February 22, 2012


-----------------------------------------------------------------------------
Table of Contents-----------------------------------------------------------------------------
1. Tool Definition
2. Device Support List
3. Operating System Support List
4. What's New or Updated
5. Known Problems
6. Important Notes
7. Upgrading the Firmware
8. Command Line Options
9. Exit codes
10. Troubleshooting
11. Command Line Examples
12. Customer Support----------------------------------------------------------------------------
1. Tool Definition
----------------------------------------------------------------------------
RealICECMD/ICD3CMD is a 32 bit command-line interface to
MPLAB RealICE/ICD3 device programming support.

The REALICECMD executable may be found, by default, in:
C:\Program Files\Microchip\MPLAB IDE\Programmer Utilities\RealICE

The ICD3CMD executable may befound, by default, in:
C:\Program Files\Microchip\MPLAB IDE\Programmer Utilities\ICD3

Note: RealICECMD/ICD3CMD will only work with MPLAB IDE v8.30 and above
-----
----------------------------------------------------------------------------
2. Device Support List
----------------------------------------------------------------------------
- PICmicro devices: drop "PIC", e.g., PIC16F877becomes 16F877
- dsPIC devices: drop "dsPIC", e.g., dsPIC30F6014 becomes 30F6014


----------------------------------------------------------------------------
3. Operating System Support List
----------------------------------------------------------------------------
Windows 98, Windows® 2000 SP4, Windows XP SP2 and Windows Vista™ (32-Bit)* OSs

* Only initial testing has been performedon 32-bit Vista for this release.

NOTE: Windows NT® and Windows ME OSs are NOT supported.

----------------------------------------------------------------------------
4. What's New or Updated
----------------------------------------------------------------------------

1.0.2 Auto Update Firmware
1.0.3 SQTP Support and Batch mode Operation
1.0.4 Power Target from ICD3
1.0.5Programming Calibration memory
1.0.6 Hold in Reset
1.0.7 Release From Reset,Reporgramming and Read specific region
1.0.8 High Voltage MCLR and Program only selected Program Memory Range
1.0.9 REALICE Command line utility (RealICECMD) now supports programming
and reading program memory ranges.

----------------------------------------------------------------------------
5.Known Problems
----------------------------------------------------------------------------

ICD3-243: RealICECMD/ICD3CMD does not work on 64-bit OSs. The issue is that
if the command line tool has to switch firmware versions, it will not be
able to do that as it times out early.

Workaround: Download the correct firmware for the device using MPLAB IDE.
Once that is done the commandline utility will detect the device.

----------------------------------------------------------------------------
6. Important Notes
----------------------------------------------------------------------------
a. RealICECMD/ICD3CMD will auto update Firmware, this will cause delay to the operation
b. Part name should be mentioned without Family Information like PIC/dsPICExample. PIC18F67J50 should be mentioned as -P18F67J50
c. Program and Verify Operation makes use of Selected Hex File using -F
d. Only Single session of RealICE/ICD3 communication is allowed
e. Command line arguments are parsed alphabetically
f. Batch Mode Operation will Initialize the RealICE/ICD3 once and perform the
same operations repeatedly. On each repeat operation user...
tracking img