Electrinica

Disponível somente no TrabalhosFeitos
  • Páginas : 13 (3061 palavras )
  • Download(s) : 0
  • Publicado : 29 de março de 2012
Ler documento completo
Amostra do texto
ICL8013
Data Sheet April 1999 File Number 2863.4

1MHz, Four Quadrant Analog Multiplier
The ICL8013 is a four quadrant analog multiplier whose output is proportional to the algebraic product of two input signals. Feedback around an internal op amp provides level shifting and can be used to generate division and square root functions. A simple arrangement of potentiometers may be used to trimgain accuracy, offset voltage and feedthrough performance. The high accuracy, wide bandwidth, and increased versatility of the ICL8013 make it ideal for all multiplier applications in control and instrumentation systems. Applications include RMS measuring equipment, frequency doublers, balanced modulators and demodulators, function generators, and voltage controlled amplifiers.

Features
•Accuracy. . . . . . . . . . . . . . . . . . . . . . . . ±1% (“B” Version) • Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . ±10V • Bandwidth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1MHz • Uses Standard ±15V Supplies • Built-In Op Amp Provides Level Shifting, Division and Square Root Functions

Pinout
ICL8013 (METAL CAN) TOP VIEW
YOS 10 YIN V+ 2 3 4 5V6 1 9 ZOS 8 7 XIN GND XOS

Ordering Information
PART NUMBER ICL8013BCTX ICL8013CCTX MULTIPLICATION ERROR (MAX) ±1% ±2% TEMP. RANGE (oC) 0 to 70 0 to 70 PKG. NO.

PKG

ZIN

10 Pin T10.B Metal Can 10 Pin T10.B Metal Can

OUTPUT

Functional Diagram
ZIN

XIN XOS

VOLTAGE TO CURRENT CONVERTER AND SIGNAL COMPRESSION

BALANCED VARIABLE GAIN AMPLIFIER ZOS

OP AMP

OUT

YIN YOSVOLTAGE TO CURRENT CONVERTER

ZIN

1

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999

ICL8013
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 Input Voltages (XIN, YIN, ZIN, XOS, YOS, ZOS) .. . . . . . . . VSUPPLY

Thermal Information
Thermal Resistance (Typical, Note 1) θJA (oC/W) θJC (oC/W) Metal Can Package . . . . . . . . . . . . . . . 160 75 Maximum Junction Temperature (Metal Can Package) . . . . . . .175oC Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC

Operating ConditionsTemperature Range ICL8013XC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 70oC

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTE: 1.θJA is measured with the component mounted on an evaluation PC board in free air.

Electrical Specifications

TA = 25oC, VSUPPLY = ±15V, Gain and Offset Potentiometers Externally Trimmed, Unless Otherwise Specified TEST CONDITIONS ICL8013B MIN -10 < X < 10 -10 < Y < 10 X = -10 X = -1 TYP XY 10 10Z X 0.3 1.5 ±0.5 ±0.2 1.0 750 45 75 5 1 1 0.6 3 MAX 1.0 100 100 MIN ICL8013C TYP XY 10 10Z X 0.3 1.5±0.8 ±0.3 1.0 750 45 75 5 1 1 0.6 3 MAX 2.0 200 150 % Full Scale % Full Scale mV mV % Full Scale UNITS

PARAMETER Multiplier Function Multiplication Error Divider Function Division Error

Feedthrough

X = 0, Y = ±10V Y = 0, X = ±10V

Non-Linearity X Input Y Input Frequency Response Small Signal Bandwidth (-3dB) Full Power Bandwidth Slew Rate 1% Amplitude Error 1% Vector Error (0.5o PhaseShift) Settling Time (to ±2% of Final Value) VlN = ±10V X = 20VP-P Y= ±10VDC Y = 20VP-P X = ±10VDC % % MHz kHz V/µs kHz kHz µs µs mVRMS mVRMS MΩ MΩ kΩ µA µA

Overload Recovery (to ±2% of Final Value) VlN = ±10V Output Noise 5Hz to 10kHz 5Hz to 5MHz Input Resistance X lnput Y lnput Z lnput Input Bias Current X or Y Input Z Input VlN = 0V VlN = 0V

-

10 6 36

-

-

10 6 36

-

-...
tracking img