Disponível somente no TrabalhosFeitos
  • Páginas : 29 (7227 palavras )
  • Download(s) : 0
  • Publicado : 11 de abril de 2011
Ler documento completo
Amostra do texto

ICL7106, ICL7107, ICL7107S
Data Sheet December 1, 2005 FN3082.8

3 1/2 Digit, LCD/LED Display, A/D Converters
The Intersil ICL7106 and ICL7107 are high performance, low power, 31/2 digit A/D converters. Included are seven segment decoders, display drivers, a reference, and a clock. The ICL7106 is designed to interface with a liquid crystal display (LCD) and includes a multiplexedbackplane drive; the ICL7107 will directly drive an instrument size light emitting diode (LED) display. The ICL7106 and ICL7107 bring together a combination of high accuracy, versatility, and true economy. It features autozero to less than 10µV, zero drift of less than 1µV/oC, input bias current of 10pA (Max), and rollover error of less than one count. True differential inputs and reference are useful inall systems, but give the designer an uncommon advantage when measuring load cells, strain gauges and other bridge type transducers. Finally, the true economy of single power supply operation (ICL7106), enables a high performance panel meter to be built with the addition of only 10 passive components and a display.

• Guaranteed Zero Reading for 0V Input on All Scales • True Polarityat Zero for Precise Null Detection • 1pA Typical Input Current • True Differential Input and Reference, Direct Display Drive - LCD ICL7106, LED lCL7107 • Low Noise - Less Than 15µVP-P • On Chip Clock and Reference • Low Power Dissipation - Typically Less Than 10mW • No Additional Active Circuits Required • Enhanced Display Stability • Pb-Free Plus Anneal Available (RoHS Compliant)

PART NO. ICL7106CPL ICL7106CPLZ (Note 2) ICL7106CM44 ICL7106CM44Z (Note 2) ICL7106CM44ZT (Note 2) ICL7107CPL ICL7107CPLZ (Note 2) ICL7107RCPL ICL7107RCPLZ (Note 2) ICL7107SCPL ICL7107SCPLZ (Note 2) ICL7107CM44 ICL7107CM44T ICL7107CM44Z (Note 2) ICL7107CM44ZT (Note 2) NOTES: 1. “R” indicates device with reversed leads for mounting to PC board underside. “S” indicates enhanced stability. 2.Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.3. Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. PART MARKING ICL7106CPL ICL7106CPLZ ICL7106CM44 ICL7106CM44Z ICL7106CM44Z ICL7107CPL ICL7107CPLZ ICL7107RCPL ICL7107RCPLZ ICL7107SCPL ICL7107SCPLZ ICL7107CM44 ICL7107CM44 ICL7107CM44Z ICL7107CM44Z TEMP. RANGE (°C) 0 to 70 0 to 70 0 to 70 0 to 70 0 to 700 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 40 Ld PDIP 40 Ld PDIP(Pb-free) (Note 3) 44 Ld MQFP 44 Ld MQFP (Pb-free) PACKAGE PKG. DWG. # E40.6 E40.6 Q44.10x10 Q44.10x10

44 Ld MQFP Tape and Reel (Pb-free) Q44.10x10 40 Ld PDIP 40 Ld PDIP(Pb-free) (Note 3) 40 Ld PDIP (Note 1) 40 Ld PDIP (Pb-free) (Notes 1, 3) 40 Ld PDIP (Notes 1, 3) 40 Ld PDIP (Pb-free) (Notes1, 3) 44 Ld MQFP 44 Ld MQFP Tape and Reel 44 Ld MQFP (Pb-free) E40.6 E40.6 E40.6 E40.6 E40.6 E40.6 Q44.10x10 Q44.10x10 Q44.10x10

44 Ld MQFP Tape and Reel (Pb-free) Q44.10x10


CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.Copyright Intersil Americas Inc. 2002, 2004, 2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners.

ICL7106, ICL7107, ICL7107S Pinouts
V+ D1 C1 B1 (1’s) A1 F1 G1 E1 D2 C2 (10’s) B2 A2 F2 E2 D3 (100’s) B3 F3 E3 (1000) AB4 (MINUS) POL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 40 OSC 1 39 OSC 2 38 OSC 3 37...
tracking img