Analize de circuitos

Disponível somente no TrabalhosFeitos
  • Páginas : 294 (73333 palavras )
  • Download(s) : 0
  • Publicado : 31 de maio de 2011
Ler documento completo
Amostra do texto
Diagnostics Guide 09.2001 Edition

User Documentation



Diagnostics on the PLC


Error Display on CPU


Diagnostics Guide Errors with Function Macros


Parameterization Errors Spindle/Axis


Valid for
Control SINUMERIK 840C/CE (Standard/Export version) Software Version 1.x 2.x 3.x 4.x 5.x6.x 6.4 1.x 2.x 3.x 4.x 5.x Drive SIMODRIVE 611–D Software Version

09.2001 Edition

SINUMERIK documentation
Printing history Brief details of this edition and previous editions are listed below. The status of each edition is shown by the code in the “Remarks” column. Status code in the “Remarks” column: A . . . . New documentation. B . . . . Unrevised reprint with new Order No. C . . . .Revised edition with new status. If factual changes have been made on the page since the last edition, this is indicated by a new edition coding in the header on that page. Edition 09.95 04.96 08.96 07.97 01.99 09.01 Order No. 6FC5198–5AB40–0BP0 6FC5198–5AB40–0BP1 6FC5198–5AB40–0BP2 6FC5198–6AB40–0BP0 6FC5198–6AB40–0BP1 6FC5198–6AB40–0BP2 Remarks A C C C C C

This manual is included in thedocumentation on CD–ROM (DOCONCD) Edition Order No. Remarks 11.01 6FC5 198–6CA00–0BG2 C

Trademarks SIMATICR, SIMATIC HMIR, SIMATIC NETR, SIROTECR, SINUMERIKR and SIMODRIVER are trademarks of Siemens AG. All other product and system names are registered trademarks of their respective companies and must be treated accordingly.

For further informationvisit our Internet address: This publication was produced with Interleaf V 7 The reproduction, transmission or use of this document or its contents is not permitted wihout express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

Other functions not decribed in this documentation might beexecutable in the control. This does not, however, represent an obligation to supply such functions with a new control or when servicing. We have checked that the contents of this document correspond to the hardware and software described. Nonetheless, differences might exist and therefore we cannot guarantee that they are completely identical. The information contained in this document is,however, reviewed regularly and any necessary changes will be included in the next edition. We welcome suggestions for improvement. Subject to change without prior notice.

Siemens AG 1996–2001. All rights reserved.

Order No. 6FC 5198–6AB40–0BP2 Printed in the Federal Republic of Germany



Preliminary notes
This Guide serves as a reference work. It allowsthe machine tool user:

S to assess irregularities during operation at the machine correctly S to obtain information about the response of the system to the irregularity S to make use of the options for continuing operation after the irregularity
Scope Sequence Safety
Danger Please assess the condition of your plant carefully against the description of the alarm that has occurred. Eliminatethe cause of the alarm and acknowledge it as described. If alarms are ignored, danger to the machine, workpiece, stored settings, and in certain cases, to your health, could result. This description lists the diagnostics options of the PLC and the alarms of the MMC, NCK, servo and drive (SIMODRIVE 611–D) areas. In the Diagnostics Guide the alarms are sorted in ascending order of alarm numbers. Thenumbers are not necessarily contiguous.



Warning This warning notice means that loss of life, severe personal injury or substantial material damage can result if the appropriate precautions are not taken.


Caution This warning notice (with warning triangle) means that a minor personal injury can result if the appropriate precautions are not taken.

Caution This warning notice...
tracking img